PCset Help jetStamp 99018
ERNST REINER GmbH & Co. KG
Originalanleitung
4.1.1 Inserting rechargeable batteries
The batteries must be fully charged before first application. The charging time is approx. three
hours. The batteries are charged when the green charging indicator is off .
Inserting rechargeable batteries Fig.
Always replace all flat rechargeable batteries at once.
When the batteries are removed, the date, time and counter reading of the numbering machines are
maintained.
Open the battery compartment flap at the rear of the marking device.
Ensure correct polarity and insert the batteries.
Close the battery compartment flap .
4.1.2 Charge rechargeable batteries
Connect the mains adapter of the device to the connection socket provided for the mains adapter
and connect it to the mains, or connect the device to a running PC by micro USB .
Green charging indicator lights up.
Charging is complete when the charging indicator is off.
To Next Page
Loading...
Need help?
General
