PCset Help jetStamp 99046
ERNST REINER GmbH & Co. KG
Originalanleitung
6.3 Clean nozzles
Possible blindness due to eye contact with ink.
Do not point the jetStamp 990 nozzles against people's faces!
If there are streaks in the imprint or problems with the print quality, the ink may have dried on the
nozzles .
Manual nozzle cleaning
6.3.1 Manual nozzle cleaning
Manual nozzle cleaning Fig. +
To ensure high print quality, the nozzles should cleaned at regular intervals as follows:
To dissolve the dried ink, press a soft cloth slightly soaked in ethanol (spirit)
against the nozzles for about three seconds.
Dab off dissolved ink and wipe the nozzles dry.
For further information (also see "Cleaning the contacts of the print cartridge").
For notes on temperatures and humidity, see "Technical Data" in the documents accompanying
the print cartridges.
6.4 Clean print carriage
Ink and dried-in ink residues at the print carriage are removed with a soft spirit-soaked cleaning rag.
On this, see also "Cleaning contacts at the print cartridge".
To Next Page
Loading...
Need help?
General
