REPLIGEN KrosFlo KR2i User Manual

11
DOC0304
eRev. [Major Version]1.01.0 8/9/2023
User Guide
KrosFlo® KR2i Real-Time Process Management (RPM™) System
Weight 1.6 kg
Housing Materials Powder-coated Aluminum, Urethane
Table 6. Environmental Specifications
‡ Use in this temperature range for continuous duty operation with no decrease in performance or product life. Pump Heads will work outside this
range with some possible reductions in performance or product life.
Table 7. Compliance Summary
Specification Value
KR2i Main Pump
Enclosure Rating IP33
Operating Temperature 0° to 40°C (32° to 104°F)
Storage Temperature –25° to 65°C (–13° to 149°F)
Humidity (non-condensing) 10% to 90%
Altitude Less than 2000 m
Pollution Degree Pollution Degree 2
KR2i Pump Heads
Chemical resistance Most substances, except strong acids or alkalis, organic solvents, or hydrocarbons
Operating Temperature ‡ 0°C to 40°C (32°F to 104°F)
Storage Temperature -45°C to 65°C (-49°F to 149°F)
Humidity 10% to 90% (non-condensing)
Altitude 2000 m or less
FlowVPX System
Enclosure Rating IP65
Operating Temperature 0°C to 48°C (32°F to 118°F)
Operating Humidity (non-condensing) 15% to 80%
Storage Temperature -34°C to 66°C (-29°F to 150°F)
Storage Humidity (non-condensing) 0% to 95%
Pollution Degree Pollution Degree 2
KONDUiT Conductivity, Temperature, and UV Monitor
Operating Temperature 2°C to 50°C (35°F to 122°F)
Storage Temperature -25°C to 65°C (-13°F to 149°F)
Pressure Rated for up to 75 psi (5 bar)
Specification Value
KR2i TFF System
ETL UL 61010-1, CAN/CSA C22.2 No. 61010-1

REPLIGEN KrosFlo KR2i Specifications

General

Brand	REPLIGEN
Model	KrosFlo KR2i
Category	Laboratory Equipment
Language	English