REPLIGEN KrosFlo KR2i User Manual

25
DOC0304
eRev. [Major Version]1.01.0 8/9/2023
User Guide
KrosFlo® KR2i Real-Time Process Management (RPM™) System
Figure 14. Preparation to mount a second pump head
Figure 15. Engaging bayonet of second pump head to bayonet tabs on first pump head
Figure 16. Drive with both pump heads locked in position first pump head
8.6 KR2i Maintenance
No lubrication is required for the KrosFlo® Research II Pump Head. Only use a mild detergent solution or 70% isopropyl alcohol to
clean the pump head. Do not immerse nor use excessive fluid. The pump head requires no maintenance beyond cleaning. There are
no user serviceable or replaceable parts inside.
Bayonet Tabs
on Pump Front
Cosmetic
Cover
Notch (here and
on opposite edge)
CAUTION: Be sure that the bayonet features on back of each pump head are fully engaged with bayonet tabs on the
mounting plate or adjacent pump head before operating pump drive. The bayonet lock lever (see Figure 11)
will snap back when bayonet features engage completely.

REPLIGEN KrosFlo KR2i Specifications

General

Brand	REPLIGEN
Model	KrosFlo KR2i
Category	Laboratory Equipment
Language	English