REPLIGEN KrosFlo SYITF-2000 User Manual

KrosFlo® Systems
User Guide
35
IF.UG.IM_R1
10.1.3 Installing Permeate Flow Sensors
A Flow-through Permeate Flow Sensor is included as part of the sterile disposable ProConnex® flow-
path (Module Bag Tubing - MBT) that is shipped with your System.
1. Align white arrow on cable to white dot on the flow transmitter.
2. With the collar pulled back, slide the connector into position.
3. Push the collar forward to lock the connector into place. This is a push to connect
connection.
Note:
• Use cable extensions if needed.
• Before disconnecting, the collar should be retracted first.
10.1.4 Other Sensor and Communication Cables
Connect the sensor plugs to the waiting sockets. Depending on the System configurations, these
connections may include:
• Flow meters
• Pump Communication
• External inputs from permeate tanks or bioreactors.
• Integrated Scales
• Ethernet cables.
• Conductivity Sensors
• Turbidity Sensors

REPLIGEN KrosFlo SYITF-2000 Specifications

General

Brand	REPLIGEN
Model	KrosFlo SYITF-2000
Category	Laboratory Equipment
Language	English