IF.UG.IM_R1
13.4 Flow-path disassembly and storage
To disassemble and store the flow-path:
1. In reverse order, follow the steps listed in Section 6 to disassemble the flow-path.
2. Cap all the feed, column, and outlet ports.
3. Put the flow-path into the storage box.
13.5 System Moving and Storage
To move and store the System:
1. Retract the leveling feet.
2. Unlock the wheels and have at least 2 people roll the System to the storage location.
3. Lock the wheels
4. Extend the leveling feet and use them to support and level the System.
WARNING – Refer to section 3 for Safety Precautions
To Next Page
Loading...
Need help?
General
