97
4. Facsimile Features
This chapter describes user tools in the Facsimile Features menu. For details on
how to access Facsimile Features, see "Accessing User Tools".
General Settings/Adjustment
This section describes the user tools in the General Settings/Adjustment menu
under Facsimile Features.
❖ Memory / Immed. Transmission Switch
Specify the Transmission Mode for document transmission.
The default setting is Memory Transmission.
❖ Text Size Priority
Specify the character size of your originals for scanning.
The default setting is Standard.
❖ Original Type Priority
Specify the type of originals for scanning.
The default setting is Text.
❖ Auto Image Density
Use this function to prioritize automatic Image Density for scanning your
originals.
The default setting is On.
❖ Adjust Scan Density
Specify the scan density of your originals.
The default setting is Level 4.
❖ Select Title
Use this function for selecting the title to be shown on the destination list.
The default setting is Title 1.
❖ Change Initial Mode
Select whether contents registered in program No.1 are to be used as the ini-
tial settings after the power is turned on or the {Clear Modes} key is pressed.
The default setting is Standard.
You cannot select Program No.1 if program No.1 has not been programmed
with priority functions.
❖ Adjust Sound Volume
Adjust the sound volume during On Hook Mode and Immediate Transmis-
sion.
The default settings for each sound volume are Level 2.
To Next Page
Loading...
Need help?
General
