Stamp
89
3
Stamp
This section describes the user tools in the Stamp menu under Copier / Docu-
ment Server Features.
Default settings are shown in bold type.
Background Numbering
This section describes the user tools in the Background Numbering menu under
Stamp.
❖ Size
You can set the size of the numbers.
The default setting is Normal.
❖ Density
You can set the density of the numbers.
The default setting is Normal.
Preset Stamp
This section describes the user tools in the Preset Stamp menu under Stamp.
❖ Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is pressed.
The default setting is Copy.
❖ Stamp Language
You can select the language of the message printed in Stamp mode.
The default setting is English.
❖ Stamp Position
You can set the position where the stamp is printed.
Press the arrow keys to adjust the position.
The default setting for "Position" is Top Right.
The default setting for "Top Margin" is 24 mm (Metric version) / 1.0" (Inch
version).
The default setting for "Right Margin" is 24 mm (Metric version) / 1.0" (Inch
version).
To Next Page
Loading...
Need help?
General
