Interface Settings
51
2
Interface Settings
This section describes the user tools in the Interface Settings menu under System
Settings.
Default settings are shown in bold type.
Network
This section describes the user tools in the Network menu under Interface Set-
tings.
❖ IP Address
Before using this machine in the network environment, you must specify the
IP address and subnet mask.
When you select [Specify], enter the IP Address and subnet mask as
"xxx.xxx.xxx.xxx" ("x" indicates a number).
The default setting is Auto-Obtain (DHCP).
When you select [Specify], make sure that the IP address is different from that
of other machines on the network.
The physical address (MAC address) also appears.
❖ Gateway Address
A gateway is a connection or interchange point between two networks.
Specify the gateway address for the router or host computer used as a gate-
way.
The default setting is 000.000.000.000.
❖ DNS Configuration
Make settings for the DNS server.
When you select [Specify], enter the DNS Server IP address as
“xxx.xxx.xxx.xxx"(“x" indicates a number).
The default setting is Auto-Obtain (DHCP).
❖ DDNS Configuration
Specify the DDNS settings.
The default setting is Active.
❖ Domain Name
Specify the domain name.
Enter the domain name using up to 63 characters.
❖ WINS Configuration
Specify the WINS server settings.
The default setting is On.
If [On] is selected, enter the WINS Server IP address as “xxx.xxx.xxx.xxx"(“x"
indicates a number).
If DHCP is in use, specify the scope ID.
Enter the scope ID using up to 31 characters.
To Next Page
Loading...
Need help?
General
