General Features
45
2
❖ Output: Printer (printer)
Specify a tray to which documents are delivered.
The default setting is Internal Tray 1.
The output trays set on the printer driver have priority over the output tray
specified above.
❖ Prepare Stapling
When the booklet finisher is installed, perform a stapling test (five to seven
times) after replacing staples for saddle stitching, or removing jammed sta-
ples.
Reference
p.3 “Accessing User Tools”
"Function Compatibility", Copy/Document Server Reference
Output tray settings
You cannot interrupt the current stapling job even if a stapling job is specified
by a different function.
When the 1000-sheet finisher, 2 Tray finisher or booklet finisher is installed and
stapling or shift-sorting is specified for a job, the job will be delivered to the fin-
isher shift tray, finisher shift tray 1 or finisher shift tray 2 regardless of the output
tray specified.
To Next Page
Loading...
Need help?
General
