Timer Settings
49
2
Timer Settings
This section describes the user tools in the Timer Settings menu under System
Settings.
Default settings are shown in bold type.
❖ Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
"Auto Off". The machine status after the Auto Off operation is referred to as
"Off mode", or "Sleep mode". For the Auto Off Timer, specify the time to
elapse before "Auto Off".
The default setting is 1 minute(s).
Enter a time interval between 0 and 240 minutes, using the number keys
From "Off mode" or "Sleep mode", the machine is ready to use within 10 sec-
onds.
Auto Off may not work when error messages appear.
The machine may not shift to "Sleep Mode" at the set time, if the main power
switch has just been turned on and functions other than copier function are
still in the process of starting up.
❖ Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
Enter a time interval between 10 seconds and 240 minutes, using the number
keys.
The default setting is 1 minute(s).
❖ System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
The time can be set from 10 to 999 seconds, using the number keys
The default setting is On, 60 seconds.
❖ Copier / Document Server Auto Reset Timer (copier/Document Server)
Specifies the time to elapse before copier and Document Server modes reset.
If [Off] is selected, the machine does not automatically switch to the user code
entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is On, 60 seconds.
❖ Facsimile Auto Reset Timer (facsimile)
Specifies the time to elapse before the facsimile mode resets.
The time can be set from 30 to 999 seconds, using the number keys.
The default setting is 30 seconds.
❖ Printer Auto Reset Timer (printer)
Specifies the time to elapse before the printer function resets.
To Next Page
Loading...
Need help?
General
