• The detailed procedure for entering the service mode of the Smart Organizing Monitor is provided
in the training materials for these machines. The procedure for entering the service mode is not
described in the service manuals.
• Service technicians must know how to enter the service mode before servicing these machines.
Please refer to the training materials.
Machine Names
Name Abbrev. Production Name Model No.
Aficio SP 100 P ME-P1 M101
Aficio SP 100SU TiO ME-MF1a M102
Aficio SP 100SF FiO ME-MF1b M103
The abbreviated notations in the second column above (not used in these service manuals) are used in
the operating instructions to distinguish the machine models:
• P: Printer only
•
TiO: Three-in-1 (printer, copier, scanner)
• FiO: Four-in-1 (printer, copier, scanner, FAX)
• Throughout this manual the machines are referenced by the model numbers only: M101, M102,
M103.
AIO (All In One) Cartridge
The AIO (print cartridge) in the center of the machine is permanently sealed around these main elements
of the printing mechanisms: 1) OPC drum, 2) charge unit, 3) development unit, 4) drum cleaning unit,
and 5) toner supply unit.
• This print cartridge is called the "AIO" (All-In-One) throughout this service manual.
•
When toner runs out, the AIO can be refilled by the service technician or the AIO can be replaced
by the operator. Refilling requires removal of two caps: the square cap to dump the toner and the
round cap for refilling. These two parts are the only service parts for the AIO. There are no other
service parts for the AIO.
• The AIO can be easily removed and replaced by the user. For more details, please refer to the
operating instructions.
3
To Next Page
Loading...
Need help?
General