Ricoh Aficio SP 100 User Manual

Flatbed Scanner
Separating the Flatbed Units
The procedures for separating the top and bottom halves of the flatbed unit are different for the M102
and M103.
• Follow the appropriate procedure below to separate the top and bottom of the flatbed unit.
•
Follow the procedures later in this section to remove the scanner motor or CIS. (These procedures
are the same for both the M102 and M103).
Flatbed Scanner (M102)
Preparation
• Front cover ( p.50 "M102 Covers, Platen Cover, Flatbed Unit")
• Right cover
• Left cover
• Platen cover
• Flatbed unit
1. Turn the flatbed unit over so the exposure glass is facing down.
2. Remove the edge plate ( x2).
4. Replacement and Adjustments
144

Ricoh Aficio SP 100 Specifications

General

Brand	Ricoh
Model	Aficio SP 100
Category	Printer
Language	English