When You Cannot Print
This section describes what to do if printing does not start even after performing a printing operation.
Problem Causes Solutions
Printing does not start. The power is off. Check the cable is securely plugged
into the power outlet and the machine.
Turn on the main power switch.
Printing does not start. The machine is set to
"Offline".
Press [ Online].
Printing does not start. The cause is displayed on
the screen of the control
panel.
Check the error message or warning
status on the display panel, and then
take the required action.
Printing does not start. The interface cable is not
connected correctly.
Connect the interface cable securely. If
it has a fastener, fasten that securely as
well. See "Connecting to the Interface",
Network and System Settings
Reference.
Printing does not start. The correct interface cable is
not being used.
The type of interface cable you should
use depends on the computer. Be sure
to use the correct one. If the cable is
damaged or worn, replace it. See
"Connecting to the Interface", Network
and System Settings Reference.
Printing does not start. The interface cable was
connected after the machine
was switched on.
Connect the interface cable before
turning on the main power switch.
When You Cannot Print
91
To Next Page
Loading...
Need help?
General
