PRINTER ENGINE SERVICE MODE
G065 5-28 SM
SP7 Mode Number Function and [Setting]
Jam Count by Copy Size
05
A4 H (Sideways)
06
A5 H (Sideways)
14
B5 H (Sideways)
38
LT H (Sideways)
44
HLT H (Sideways)
132
A3 V (Lengthwise)
133
A4 V (Lengthwise)
134
A5 V (Lengthwise)
141
B4 V (Lengthwise)
142
B5 V (Lengthwise)
160
DLT V (Lengthwise)
164
LG V (Lengthwise)
166
LT V (Lengthwise)
172
HLT V (Lengthwise)
7506*
255
Other
Displays the total number of copy jams by paper
size.
7803*
02
PM Counter Display
Displays the PM counter since the last PM and
resets the counter for PCU replacement to zero.
When the count exceeds the setting for SP5501-
03, the PCU count warning for replacement is
displayed.
7807
SC/Jam Counter Reset
Resets the SC and jam counters. To reset, press
#(Enter).
7808
Counter Reset
Resets all counters excluding SP7003-***, 7006-
***, 7007-***. Press #(Enter) to reset.
Print Counter Reset
01 Tray 1
02 Tray 2
03 Tray 3
04 Tray 4
05 LCT
7816
06 By-pass
Resets the total copy count by paper tray. To
reset, press #(Enter).
Use these SP modes when replacing the pick-
up, feed, and separation rollers.
7832
Self-Diagnosis Result Display
Displays the results of self-diagnostic testing.
When there are no errors, 00/00 is displayed. If
an error occurred, the display will show the SC
number.
ROM Number
01 System
02 Engine
07 Finisher
09 Bank
10 LCT
7910
11 Print Post
Acquires the ROM section number and records
it, and prints the number in the SMC Report.
The ROM section number is not displayed on
the operation panel. This SP appears only in the
SMC report.
To Next Page
Loading...
Need help?
General
