that appears before login. If you register the URL of a page that appears after login, Web
Image Monitor will not open properly from the bookmark.
To change the settings, click [Login] at the top right on the screen and enter the User Name
and Password.
Recommended Web Browser
Windows macOS
Internet Explorer 11 or later Safari 3.0 or later
Firefox 52 or later Firefox 52 or later
Google Chrome version 50 or later Google Chrome version 50 or later
Microsoft Edge 20 or later -
• You can use the screen reader software JAWS 7.0 or later on Internet Explorer.
• When you use a DNS server or WINS server, you can use Host Name instead of IP address to
connect the server.
• When the screen is distorted or the operation is unstable, confirm that "JavaScript" or "Use
Cookies" is specified to Active on the computer.
• When using Host Name under Windows Server 2008 or later in the IPv6 environment, resolve
Host Name in the external DNS server. You cannot use the host file.
• When specifying the settings from Web Image Monitor, do not log in to the machine from the
control panel. The setting value may not be reflected.
• If you are using a proxy server, change the web browser settings so that no data goes through the
proxy server to connect to this machine. Contact your administrator for information about the
settings.
• If you click your browser's back button but the previous page does not appear, click the browser's
refresh button and try again.
What You Can Do on the Web Image Monitor
Items displayed on the Web Image Monitor and settings depend whether the machine is logged in.
• When not logged in
The machine status, settings, and job status are displayed. You can browse the settings of the
machine but cannot change them.
• When logged in (as a user)
8. Web Image Monitor
178
To Next Page
Loading...
Need help?
General
