Ricoh IM 2500 Series User Manual

Placing an Original on the Exposure Glass
Use the exposure glass to scan originals that cannot be placed in the auto document feeder (ADF), such
as books and license cards.
• When lowering the ADF, do not place your hands on the hinges and exposure glass. Your
hands or fingers are caught, which can result in injury.
• Do not lift the ADF forcefully. The cover of the ADF might open and cause injury. The ADF, or its
hinges may also become damaged.
1. Lift the ADF or the exposure glass cover.
Lift the ADF or the exposure glass cover by more than 30 degrees to detect the document size
automatically when placing an original on the exposure glass.
2. Place the original face down and aligned to the mark on the upper left corner of the scan
area.
DZW102
page 213 "Recommended Original Size and Weight"
page 215 "Sizes Detectable with Auto Paper Select"
3. Lower the ADF or the exposure glass cover.
• When you place a thick book or three-dimensional original on the exposure glass and lower the
ADF, the back side of the ADF rises up to accommodate the original.
2. Getting Started
62

Ricoh IM 2500 Series Specifications

General

Output Capacity	500 sheets
Duplex Printing	Yes
Technology	Laser
Print Speed	25 ppm (A4)
Memory	2 GB
ARDF Capacity	100 sheets
Print Resolution	1, 200 x 1, 200 dpi
Power Source	220 - 240 V, 50/60 Hz
Type	Multifunction Printer
Function	Print, Copy, Scan, Fax
Paper Tray Capacity	500 sheets
HDD	320 GB
Paper Size	A3, A4, A5, B4, B5
Paper Weight	52 to 300 g/m²
Interface	USB 2.0, Ethernet
Compatibility	Windows, Mac, Linux
Finishing Options	Yes (optional finisher)