Message Cause Solution and reference
"The selected paper
type is not
supported. This job
has been
cancelled."
A paper type that
cannot be fed on
the machine was
specified and
printing was
canceled by the
auto job cancel
function that was
activated.
Print the document on paper of a type that can be fed
on the machine.
"You do not have a
privilege to use this
function. This job has
been cancelled."
Authentication
information is not
registered correctly
in the printer driver.
Specify the authentication information in the printer
driver. For the authentication information, consult the
user administrator.
See "Specifying Login Information in the Printer Driver",
User Guide (Full Version).
The user registered
in the printer driver
does not have
permission to use
the printer function.
Consult the user administrator. The user administrator
can change the access permissions in the address book.
See "Confirming the Available Functions", User Guide
(Full Version).
"Z-fold error." A setting in which Z-
fold cannot be
performed was
specified, and the
Z-fold function was
canceled.
Check the tray, paper orientation and print data
orientation settings, and the specified position for
postprocessing.
Messages that Appear with Error Codes
Check the system configuration list or print settings list. The details of the error may also be printed in the
list.
See "List/Test Print", User Guide (Full Version).
Message Cause Solution and reference
"84: Insufficient memory
for image processing."
The amount of available
work area is insufficient for
processing images.
Reduce the transmission data.
10. Troubleshooting
270
To Next Page
Loading...
Need help?
General
