Name: Ricoh IM 2500 Series
Brand: Ricoh
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6. Press [Custom] from the list shown.

D0CHPA5112

7. Press the value in the "A" or "B" field, and then enter the new value.

Specify the values within the numbers of "< >", and then press [Done].

8. Press [OK] three times.

9. After completing the configuration, press [Home] ( ).

Specifying Paper Type and Thickness Settings

If the print settings and the loaded paper that are used for a print job do not match, a mismatch error

occurs.

Check and specify the paper settings before you start printing.

• Before you change the settings, confirm the priority of the paper settings for printing (priority to the

printer driver or to the control panel).

• [Settings] [Printer Settings] [System] [Paper In/Out] [Tray Setting Priority]

On the printer driver

Check the settings of paper tray and paper type on the printer driver and make sure the settings

match the loaded paper.

Loading Paper into the Paper Tray

195

Other manuals for Ricoh IM 2500 Series

Questions and Answers:

Need help?

Do you have a question about the Ricoh IM 2500 Series and is the answer not in the manual?

General