Ricoh IM 2500 Series User Manual

When the Machine Cannot Be Operated
• If a message is displayed on the screen, check the message.
• page 237 "When a Message Appears and the Machine Cannot Be Operated"
• When confirming or changing the settings in [Settings], press [Home] ( ) after completing the
operation to close [Settings].
When the Machine Does Not Respond Correctly to an Operation on the
Control Panel
Condition Cause Solution and reference
The screen of the control
panel is not lit.
The machine is in the sleep
mode.
Touch the screen.
Nothing is displayed
when you touch the
screen.
The power of the machine is
turned off.
Check that the main power indicator is not
lit, and then turn on the main power of the
machine.
page 17 "Turning On and Off the Power"
The power of the
machine does not come
on.
The power cable is
unplugged from the wall
outlet.
Connect the ground wire, and plug the
power cable into the wall outlet.
See "Installation Requirements After
Moving the Machine", User Guide (Full
Version).
The machine is connected to
an extension cord.
You cannot use an extension cord.
After checking that the screen is not lit when
you touch it and the main power indicator
is unlit, remove the extension cord and plug
the power cable directly into the wall
outlet.
There may be a problem
with the wall outlet.
After checking that the screen is not lit when
you touch it and the main power indicator
is unlit, plug the power cord into a
confirmed operating wall outlet.
When the Machine Cannot Be Operated
231

Ricoh IM 2500 Series Specifications

General

Output Capacity	500 sheets
Duplex Printing	Yes
Technology	Laser
Print Speed	25 ppm (A4)
Memory	2 GB
ARDF Capacity	100 sheets
Print Resolution	1, 200 x 1, 200 dpi
Power Source	220 - 240 V, 50/60 Hz
Type	Multifunction Printer
Function	Print, Copy, Scan, Fax
Paper Tray Capacity	500 sheets
HDD	320 GB
Paper Size	A3, A4, A5, B4, B5
Paper Weight	52 to 300 g/m²
Interface	USB 2.0, Ethernet
Compatibility	Windows, Mac, Linux
Finishing Options	Yes (optional finisher)