Ricoh IM 2702 User Manual

When Other Messages Are Displayed
• When confirming or changing the settings in [Settings], press [Home] ( ) after closing [Settings].
Message Cause Solution and reference
"Administrator
Authentication for User
Management must be set
to on before this selection
can be made."
The User Management
privilege is disabled in
the administrator
authentication
management.
When specifying Basic, Windows, or LDAP
authentication, configure the User
Management privilege in [Settings]
[Machine Features Settings] [System
Settings] [Administrator Tools]
[Administrator Authentication Management].
See "Registering the Administrator Before
Using the Machine", User Guide (Full Version).
"Currently printing at low
speed due to low voltage
power supply."
Printing has slowed
down because the
power supply voltage is
low.
This is not a malfunction. You can continue
printing although the printing speed is low.
"Destination list /
machine settings are
updated. Selected
destinations or function
settings have been
cleared. Please re-select
the settings."
A destination is being
registered and devices
are being configured
using Web Image
Monitor.
Wait until the message disappears and do not
turn off the power of the machine. You may not
be able to perform operations for a while
depending on the number of destinations
being registered.
"Failed to read the PDF
file."
The user attempted to
display a PDF file that is
not supported by the
Web browser of the
machine.
The Web browser of the machine supports the
PDF versions and encryption levels shown
below. Other PDF files cannot be displayed.
• PDF version: 1.3-1.7
• PDF encryption level: 128-bit AES, 256-
bit AES
"Firmware update will
start. Press [OK]. It will
start automatically after
30 seconds have
elapsed."
A firmware update is
available, and the
machine is about to
perform an update.
It is recommended to apply the update, but
you can stop the updating process by pressing
[Stop] within 30 seconds after the message is
displayed.
Do not turn off the power of the machine while
the updating process is in progress.
When Other Messages Are Displayed
205

Ricoh IM 2702 Specifications

General

Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	999 copies
Print technology	Laser
Time to first page (black, normal)	6.5 s
Print speed (black, normal quality, A3)	27 ppm
Print speed (black, normal quality, A4/US Letter)	- ppm
Digital sender	-
Printing colors	Black
Maximum duty cycle	- pages per month
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6, PostScript 3
Scan to	E-mail, File, TWAIN, USB
Scan drivers	TWAIN
Scanner type	Flatbed & ADF scanner
Scan speed (black)	50 inch/min
Image formats supported	JPEG, MMR, TIFF
Document formats supported	PDF
Faxing	Mono faxing
Fax memory	9.7 MB
Modem speed	33.6 Kbit/s
Fax coding methods	MH, MMR (Fax coding method), MR
Fax resolution (black)	200 x 200 DPI
Fax transmission speed	3 sec/page
Control type	Touch
Product color	Black, White
Built-in display	Yes
Display diagonal	7 \
Market positioning	Home & office
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security features	Locked Print, SSL communication encryption, Transport Layer Security (TLS), SMTP over SSL/TLS, Wireless LAN encryption, Network Protocol, IP filtering
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint, Google Cloud Print, Mopria Print Service
Paper input type	Paper tray
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1600 sheets
Auto document feeder (ADF) output capacity	100 sheets
Paper tray media types	Bond paper, Card stock, Labels, Letterhead, Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight	52 - 105 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B4, B5, B6
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	60 - 216 g/m²
Internal memory	2048 MB
Processor family	ARM Cortex
Processor frequency	800 MHz
Card reader integrated	No
USB connector	USB Type-A / USB Type-B
USB 2.0 ports quantity	2
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1550 W
Power consumption (ready)	94 W
Power consumption (sleep)	0.97 W
Power consumption (average operating)	- W
Energy Star Typical Electricity Consumption (TEC)	1.3 kWh/week
Mac operating systems supported	Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Server operating systems supported	Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 7, Windows 8.1

Weight and Dimensions

Depth	581 mm
Width	587 mm
Height	677 mm
Weight	46500 g