To change the envelope weight, press [ChngThickness] to specify the weight.
5. Check that the selected envelope size is correct, and then press [OK].
• If the selected envelope size is not the same as the actual size, select the
correct envelope size.
• When you select [Custom Size], enter the envelope size. When the envelope is
set with the flap opened, be sure to include the width of the flap.
6. Press [OK].
7. Place the original on the exposure glass.
page296”Envelope Orientation and Recommended Status”
8. Press [Start].
Copying onto Envelopes in the Paper Tray
• The Duplex Copy function cannot be used for envelopes. If Duplex Copy is
specified, press one of the following keys to cancel the setting.
1. Set the envelopes in the paper tray.
page296”Envelope Orientation and Recommended Status”
You can load envelopes into Trays 2–4.
page285”Recommended Paper Sizes and Types”
To Next Page
Loading...
General
