Ricoh IM C3010 User Manual

Basic Scanning
187
6
Basic Procedure for Performing Send to Folder
1. Press [Scanner] on the Home screen.
2. Select [To Folder] on the scanner screen.
3. Place the original on the scanner.
See "Placing an Original to Scan", User Guide (HTML).
4. Press [Send Settings] and configure the scan settings according to the purpose of
the scanned data.
page188”Scanning an Original with Suitable Quality and Density”
page192”Specifying the File Type or File Name When Scanning a Document”
5. Press , select [Search Address Book] or [Specify by Reg. No.] and then specify
the shared folder that is registered in the address book.
• To enter the information manually, press , and select [Manual Entry]. Select
SMB as the protocol and enter the required information. Press [Connection
Test] to test the connection. Press [Cancel] to abort the connection test, such as
when you make a mistake specifying Path.

Ricoh IM C3010 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Warm-up Time	21 seconds
Paper Weight	52 - 300 gsm
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A3
Fax	Yes
Modem Speed	33.6 kbps
Mobile Printing Support	Apple AirPrint, Mopria, Ricoh Smart Device Connector
Operating Systems Supported	Windows, macOS, Linux
Dimensions (W x D x H)	587 x 685 x 788 mm
Type	Multifunction Color Printer
Print Speed	30 ppm (Black/Color)
Memory	2 GB RAM
Hard Disk Drive	320 GB
Supported Paper Sizes	A4, A5, A6, B4, B5, B6, Letter, Legal, Custom
Scan Type	ADF, Flatbed
Scanning Speed (Black/Color)	80 ipm
Scan Destinations	Email, Folder, USB
Copy Speed	30 copies per minute
Zoom Range	25% - 400%
Fax Resolution	200 x 200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Power Consumption (Maximum)	1.5 kW
Control Panel	10.1" Smart Operation Panel