Ricoh IM C3010 User Manual

1. Introduction and Basic Operations
48
1
Confirming the initial placement of the keys
Press [Menu] ( ) [Change Key Layout] [Check the key layout of the factory
defaults] on the Fax screen. After confirming, press [Back].
Resetting the key layout to the default
Press [Menu] ( ) [Change Key Layout] [Reset Layout] [Restore] on the
Fax screen.
How to Use the Scanner Screen
There are five kinds of functions and settings on the Scanner screen.
1. Destination type selection
You can switch between [Scan to Email] and [Scan to Folder]. The items displayed in
the address book and destination entry screen for manual entry also change when
you switch the destination type.
2. Scan Files Status
You can browse the transmission history of the sent documents and cancel sending
of a document waiting in the queue. The transmission file status may not be
displayed depending on the security settings.

Ricoh IM C3010 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Warm-up Time	21 seconds
Paper Weight	52 - 300 gsm
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A3
Fax	Yes
Modem Speed	33.6 kbps
Mobile Printing Support	Apple AirPrint, Mopria, Ricoh Smart Device Connector
Operating Systems Supported	Windows, macOS, Linux
Dimensions (W x D x H)	587 x 685 x 788 mm
Type	Multifunction Color Printer
Print Speed	30 ppm (Black/Color)
Memory	2 GB RAM
Hard Disk Drive	320 GB
Supported Paper Sizes	A4, A5, A6, B4, B5, B6, Letter, Legal, Custom
Scan Type	ADF, Flatbed
Scanning Speed (Black/Color)	80 ipm
Scan Destinations	Email, Folder, USB
Copy Speed	30 copies per minute
Zoom Range	25% - 400%
Fax Resolution	200 x 200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Power Consumption (Maximum)	1.5 kW
Control Panel	10.1" Smart Operation Panel