Paper Settings Reference . For the procedure to set the Auto Tray Switching function, see
“Copier and Document Server Features”, Copy and Document Server Reference . For details
about how the Auto Tray Switching function works with custom paper, see “Tray Paper Settings”,
Paper Settings Reference .
• When copying or printing onto letterhead paper, the paper placing orientation is different
depending on which function you are using. See p.72 "Loading Orientation-Fixed Paper or Two-
Sided Paper".
• When the “Paper Weight” is set to [Paper Weight 6] or [Paper Weight 7], the copy/print speed is
slower than usual.
• The paper types you can select in Tray Paper Settings are only general classifications. Print quality
for every kind of paper in a classification is not guaranteed. See p.96 "Unusable Paper" for more
information.
• If the surface of the paper is dusty, white spots might appear on prints. To remove dust, fan the
paper thoroughly.
• Flatten out curled sheets before loading them.
• The Adjust Paper Curl function might not be able to fully remove curl, depending on the type of
paper and the direction of its grain. If long grain paper does not uncurl properly, try short grain
paper instead. For details about the Adjust Paper Curl function, see “Adjustment Settings for
Operators”, Network and System Settings Reference
.
OHP transparencies
• To print on OHP transparencies from the Wide LCT or the multi bypass tray, press the [Paper
Setting] key, and then set “Paper Type” to [OHP (Transparency)].
• When you load OHP transparencies, check the front and back of the sheets, and place them
correctly, or a misfeed might occur. For details, see Copy and Document Server Reference .
• When you use OHP transparencies, fan them for each use.
• We recommend you load OHP transparencies one by one. This prevents them becoming jammed
inside the machine.
• Also, be sure to remove printed OHP transparencies one by one as they are delivered. This
prevents them sticking together.
Translucent Paper
• We recommend you load sheets of translucent paper one by one. This prevents them becoming
jammed inside the machine.
• Also, be sure to remove printed sheets of translucent paper one by one as they are delivered. This
prevents them sticking together.
2. Adding Paper
92
To Next Page
Loading...
Need help?
General
