Supply End Option
Item Description
Supply End Option This setting is used to monitor the toner level.
• Stop Printing
Monitoring the toner level is enabled. The remaining toner level can
be checked in the control panel and on the Web Image Monitor.
• Continue Printing
The machine no longer monitors the toner level. Even when the toner
runs out, printing will continue and no messages will be displayed.
Interface Tab
Interface
Item Description
Fixed USB Port
Specifies whether the same printer/PC-Fax driver can be used for
multiple machines or not under USB connection.
If this setting is enabled, the same printer/PC-Fax driver you have
installed in your computer can be used with any machine other than the one
originally used for installation, if the machine is of the same model.
If disabled, you must install the printer/PC-Fax driver separately for
individual machines, because the machine other than the original will be
recognized as a new device upon USB connection.
Specifies whether the same printer can be used for multiple machines
or not under USB connection.
If this setting is enabled, the same printer driver you have installed in
your computer can be used with any machine other than the one originally
used for installation, if the machine is of the same model.
If disabled, you must install the printer driver separately for individual
machines, because the machine other than the original will be recognized
as a new device upon USB connection.
Configuring the System Settings
opal-p2_mf2_com_user_guide_00142134_eng.xml 175
To Next Page
Loading...
Need help?
General
