4. Start printing.
The machine prints only the one sides of pages first, and then displays on Smart Organizing
Monitor screen a message to reload the outputs turned over.
5. Take out all of the prints from the output tray and place them in Tray 1.
To print on the reverse side of the prints, turn them over so that the blank side faces down and
place them in Tray 1. Fan the paper well before loading it.
Portrait
Landscape
6.
Press [Continue].
7.
Press the [Start] key.
• If the rear cover is open, the paper is delivered face up from the rear. Rearrange the printed sheets
in the correct order.
Canceling a Print Job
You can cancel print jobs using either the machine's control panel or your computer, depending on the
status of the job.
3. Printing Documents
60 opal-p2_mf2_com_user_guide_00142088_eng.xml
To Next Page
Loading...
Need help?
General
