Exterior
• Type 1 models do not come with an Ethernet port.
• Type 1 and 2 models do not have the [WIFI/LAN] key.
• Only Type 2 and 3 models can print the test page using the [Job Reset] key.
DCT831
2
1
11
5
6
7
8
9
10
12
13
15
14
16
4
3
1. [WIFI/LAN] key
Press this key to switch between wireless and wired LAN connection.
2. [Job Reset] key
Press this key to cancel an ongoing print job. By holding down the key for 13 seconds, you can print the test
page.
3. [Start] key
You can use this key to print on the back of paper in duplex printing and to execute forced printing.
By holding down the key for 13 seconds, the configuration page or maintenance page can be printed. The
maintenance page is printed with Type 1 model and the configuration page is printed with Type 2 or Type 3
model.
4. Power Indicator
This indicator lights up blue when the machine is turned on. It flashes when a print job is received and while
printing is in progress.
Guide to Components
opal-p2_mf2_com_user_guide_00142078_eng.xml 21
To Next Page
Loading...
Need help?
General
