• If there is a paper jam in the ADF, open the ADF cover, and then remove the jammed paper.
Specify the copy setting again from the page where the paper jammed.
• To print on paper fed from Tray 1, remove the paper loaded in the bypass tray. Otherwise, the
paper in the bypass tray is fed first.
• [Sort] and [Duplex/Combine] cannot be used with the bypass tray.
• When making multiple copies of a multi-page document, you can select whether copies are output
in collated sets, or in page batches in the [Sort] setting under [Copier Features].
Canceling a Copy
If copying is canceled while scanning an original placed on the exposure glass, copying is canceled
immediately and there is no printout. If copying is canceled while scanning a multiple-page original
placed in the ADF, scanning stops halfway at the current page.
1. Press the [Copy] key.
With Type 1 models, start from Step 2.
With Type 1 or 5 models, start from Step 2.
2. Press the [Clear/Stop] key.
4. Copying Originals
66 opal-p2_mf2_com_user_guide_00142092_eng.xml
To Next Page
Loading...
Need help?
General
