6. In the [Device Settings] area, click [User Paper Type], and then change the settings as
necessary.
The screen for selecting [User Paper Type] appears.
7. Make changes to the following settings:
Paper Name: Enter a descriptive name for easier recognition.
Paper Type: Select a suitable paper type from the list.
The example below is for printing invoices.
• Enter "Invoice A" for [Paper Name].
• Select [Plain Paper] for [Paper Type]. If the setting is incorrect, the paper might become jammed
or print quality could be affected.
• For details about combinations of paper sizes and types, see "Types of Paper and Other Media".
8. Click [OK].
• You can register up to eight user paper types.
Setting User Paper Types to Trays
Before printing, set the paper registered on the user paper type to the paper tray, and then set the paper
type already registered. Paper types can be set either from Web Image Monitor or from the printer's control
panel.
1. Log on to Web Image Monitor in administrator mode.
2. In the menu area, click [Configuration].
3. In the [Device Settings] area, click [Paper].
4. Set the paper tray you want to use as a user paper type, and then select the registered paper
type.
The example below is for printing invoices.
The registered paper type "Invoice A" is displayed as [+ Invoice A (Custom x)] on this screen. Select
[+ Invoice A (Custom x)] for [User Paper Type]. Make the appropriate changes to other settings as
required.
5. Click [OK].
6. Click [Logout].
7. Quit Web Image Monitor.
• For details about loading paper, see "Loading Paper".
Using Paper Types that Have Unique Names
125
To Next Page
Loading...
Need help?
General
