2
RANGE
MODEL CODE
Condexa HPR 35 20190064
Condexa HPR 45 20190066
Condexa HPR 55 20190067
Condexa HPR 70 20190068
ACCESSORIES
For a complete list of accessories and information re-
garding how they can be combined, see the Catalogue.
Dear installer,
congratulations on having chosen a r boiler that will
guarantee optimum well-being, reliability, efciency,
quality and safety for many years to come.
This booklet provides the necessary information which,
combined with your own knowledge and expertise, will
ensure the correct and simple installation of the appli-
ance.
Thanks again and all the best for your work.
Riello S.p.A.
CONFORMITY
Condexa HPR boilers comply with:
− Regulation (EU) 2016/426
− Efciency directive: Article 7(2) and Annex III of di-
rective 92/42/EEC
− Electromagnetic Compatibility Directive 2014/30/EU
− Low Voltage Directive 2014/35/EU
− Ecodesign Requirements for Energy-Related Prod-
ucts Directive 2009/125/EC
− Regulation (EU) 2017/1369 Energy Labelling
− Delegated Regulation (EU) No. 811/2013
− Delegated Regulation (EU) No. 813/2013
− Boiler standards for gas heating – General requi-
sites and EN 15502-1 tests
− Specic regulations for type C appliances and type
B2, B3 and B5 appliances with a rated heat output
no larger than 1000 kW EN 15502-2/1
− SSIGA Gas Appliance Directive G1
− AICAA Fire prevention requirements
− CFST LPG Directive Part 2
− MISCELLANEOUS cantonal and municipal regula-
tions regarding air quality and energy savings
0476
At the end of its life, the product should
be not be disposed of as solid urban
waste, but rather it should be handed
over to a differentiated waste collec-
tion centre.
WARNING
This instructions manual contains data and in-
formation for both the user and the installer.
Specically, note that the user, for the use of the
appliance, must refer to chapters:
• Warnings and safety
• Commissioning
• Control panel
• Maintenance.
9
The user must not perform operations on the
safety devices, replacing parts of the product,
tamper with or attempt to repair the appliance.
These operations must be entrusted exclusively
professionally qualied personnel.
a
The manufacturer is not liable for any damage
caused by the non-observance of the above and/
or the failure to comply with the regulations
.