Rigol DS1000B Series Service Guide

Chapter 1 Specifications RIGOL
DS1000B Service Guide
1-1
Chapter 1 Specifications
All the specifications apply to the DS1000B series oscilloscopes unless otherwise
noted. To meet these specifications, the oscilloscope should meet the following two
conditions.
 The instrument must have been operating continuously for at least 30 minutes
under the specified operating temperature.
 You have to perform the “Self Cal” operation, accessible through the Utility menu,
if the operating temperature variation is equal to or greater than 5°C.
Note:
 The vertical scale values are measured by a probe with 1X attenuation ratio
unless otherwise noted.
 All the specifications are guaranteed unless those marked with “typical”.

Rigol DS1000B Series Specifications

General

Brand	Rigol
Model	DS1000B Series
Category	Test Equipment
Language	English