Rigol DSG800 Series User Manual

RIGOL Chapter 2 Front Panel Operations
2-34 DSG800 User's Guide
with the same name, you can press this key to replace the original file or
folder.
 Reenter: when the current directory already contains a file or folder with
the same name, you can press this key to return to the filename editing
interface and enter a new filename.
Recall
Select a file stored and press Recall to read the file and load it into the system.
Rename
Modify the filename of the file stored.
Select a file stored and press Rename to enter the filename editing interface; edit a
new filename by referring to the introduction in "
Input the filename" and press
OK to store the file with the new filename.
Delete
Select a file stored and press Delete  OK to delete the file selected.
Copy
Select a file stored and press Copy to select "Copy" or "Paste".
1. Copy
Copy the file or folder selected under the current directory.
2. Paste
Paste the file or folder.
 When the copy path is the same as the paste path and the current path
already contains a file or folder with the same name, the corresponding
copy file with the "dup1" prefix is generated after you perform the paste
operation.
 When the copy path is different from the paste path and the current path
already contains a file or folder with the same name,
— Replace File: press this key to replace the original file or folder.
— Cancel: press this key to cancel the paste operation.
w ww. . com
information@itm.com1.800.561.8187

Rigol DSG800 Series Specifications

General

Brand	Rigol
Model	DSG800 Series
Category	Portable Generator
Language	English