Chapter 6 Specifications RIGOL
DSG800 User's Guide 6-1
Chapter 6 Specifications
This chapter lists the technical specifications and general specifications of the RF
signal generator. The technical specifications are valid when the instrument is within
the calibration period, is stored for at least two hours in 0℃ to 50℃ temperature
and is warmed up for 40 minutes. Unless otherwise noted, the specifications in this
manual include the measurement uncertainty.
Typical Value (typ.): the typical performance that 80 percent of the measurement
results can meet at room temperature (approximately 25℃). This data is not
warranted and does not include the measurement uncertainty.
Nominal Value (nom.): the expected average performance or the designed
performance attribute (for example, the 50 Ω connector). This data is not warranted
and is measured at room temperature (approximately 25℃).
Measured Value (meas.): the performance attribute measured during the design
phase and used to be compared with the expected performance (for example, the
variation of the amplitude drift with time). This data is not warranted and is
measured at room temperature (approximately 25℃).
Note: Unless otherwise noted, all the values in this chapter are the measurement
results of multiple instruments at room temperature.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
