Rigol DSG800 Series User Manual

Chapter 2 Front Panel Operations RIGOL
DSG800 User's Guide 2-35
To Create a Directory
Create a new folder. The length of the folder name cannot exceed 28 English
characters or numbers (or 14 Chinese characters).
In the store and recall interface, rotate the knob to select the current storage
directory (available when a USB storage device is detected; you can switch between
D disk and E disk) and press the right direction key to unfold the current directory.
Press Create Dir to enter the filename editing interface, edit the folder name
according to the introduction in "Input the filename" and press OK to create an
empty folder under the current directory.
Filename Prefix
Press Name Prefix to select "Prefix State" or "Edit Prefix".
1. Prefix State
Press Prefix State to select "On" or "Off" to enable or disable the prefix edited.
When "On" is selected, the edited prefix will be added into the filename input
box automatically when saving a file.
2. Edit Prefix
Press Edit Prefix to enter the filename editing interface and you can use the
numeric keyboard to edit the prefix.
Format
You can press Format D to format the local disk.
System Update
Select the system update file in the USB storage device and press Update to update
the software of the RF signal generator.
w ww. . com
information@itm.com1.800.561.8187

Rigol DSG800 Series Specifications

General

Brand	Rigol
Model	DSG800 Series
Category	Portable Generator
Language	English