Rigol DSG800 Series User Manual

RIGOL Chapter 2 Front Panel Operations
2-42 DSG800 User's Guide
3. Time/Date
You can press Time/Date to set the system time of the RF signal generator.
 Set Time
Set the time displayed on the RF signal generator. The input format of the
time is "hhmmss".
For example, 23:12:11 is expressed as 231211.
 Set Date
Set the date displayed on the RF signal generator. The input format of the
date is "YYYYMMDD".
For example, 2014/12/22 is expressed as 20141222.
 Time/Date
Turn on or off the display of the time and date.
Power Status
Press Syst  Pwr Status to select "Default" or "Open".
 When "Default" is selected, you need to press the power key at the front panel
to start the instrument after the instrument is powered on.
 When "Open" is selected, the instrument starts automatically after it is powered
on.
Information
Press Syst  Information to view the "System Info", "HW Info" and "System
Msg".
1. System Information
 Model
 Serial NO.
 SW Version
 Boot Version
 Option
2. Hardware Information
 RFB Version
 DB Version
 RFB FPGA
3. System Message
Display the list of the messages recently displayed.
w ww. . com
information@itm.com1.800.561.8187

Rigol DSG800 Series Specifications

General

Brand	Rigol
Model	DSG800 Series
Category	Portable Generator
Language	English