Chapter 2 Front Panel Operations RIGOL
DSG800 User's Guide 2-41
0 to 255. You are recommended to ask your network administrator for
an available IP address.
b) Press Sub Mask and use the numeric keyboard to input the desired
subnet mask.
The format of the subnet mask is nnn.nnn.nnn.nnn. Wherein, the
range of the nnn is from 0 to 255. You are recommended to ask your
network administrator for an available subnet mask.
c) Press Gateway and use the numeric keyboard to input the desired
gateway address.
The format of the gateway is nnn.nnn.nnn.nnn. Wherein, the first nnn
ranges from 1 to 223 (except 127) and the other three range from 0 to
255. You are recommended to ask your network administrator for an
available gateway address.
Note: When configuring the IP address, the priority order of three IP
address setting methods is DHCP, auto IP and manual IP; besides, the three
setting methods cannot be disabled at the same time.
DNS
Press DNS to set the IP address of the DNS server. The format of the DNS
address is nnn.nnn.nnn.nnn. Wherein, the first nnn ranges from 1 to 223
(except 127) and the other three range from 0 to 255. You are
recommended to ask your network administrator for an available address.
Display Setting
Control the screen display.
Press Syst Display to set the "Scr State", "Brightness" and "Time/Date".
1. Screen State
Press Scr State to set the on/off state of the screen.
On: the default state. Turn on the screen.
Off: turn off the screen. At this point, the screen stops updating and is
locked; the measurement speed is improved. You can press ESC to unlock
the screen. Screen locking is mainly used in remote operation mode.
2. Brightness
Press Brightness to set the brightness of the LCD backlight of the RF signal
generator.
Use the numeric keys, knob or direction keys to modify this parameter.
The range of the brightness is from 1 to 8.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
