Rinstrum - 5200 Communications Manual Rev 1.2
Page 2 0025-605-120
Copyright
All Rights Reserved. No part of this document may be copied, reproduced, republished,
uploaded, posted, transmitted, distributed, stored in or introduced into a retrieval system in
any form, or by any means (electronic, mechanical, photocopying, recording or otherwise)
whatsoever without prior written permission of Rinstrum Pty Ltd.
Disclaimer
Rinstrum Pty Ltd reserves the right to make changes to the products
contained in this manual in order to improve design, performance or reliability.
The information in this manual is believed to be accurate in all respects at the time of
publication, but is subject to change without notice. Rinstrum Pty Ltd assumes no
responsibility for any errors or omissions and disclaims responsibility for any
consequences resulting from the use of the information provided herein.
SPECIAL NOTE
Trade Use of the Rinstrum 5200
This manual may occasionally make reference to Trade Use settings of the 5200. Only
properly marked Trade Certified versions of the 5200 can be used in Legal for Trade
applications. Trade Certification is available only on 5200 instruments with software
Versions 1.0 and above.
Some individual settings may not be legal for trade use. Please check regulations with the
appropriate Weights and Measures Authority.
“Everything should be made as simple as possible, but not simpler.”
- Albert Einstein -
To Next Page
Loading...
Need help?
General
