Rinstrum 5200 User Manual

Rinstrum - 5200 Communications Manual Rev 1.2
0025-605-120 Page 17
2.4.8. COF: Set Output Format
This is used to set the default output format and reading of the MSV? query. It also
sets the format for the automatic serial outputs.
General Details
No. of Parameters Save Changes Changes Used Increment Trade Counter
1 With TDD1 Immediately No
Parameter Details
Parameter Description Range Default Required
1 Format Setting 0 to 11 6 No
Binary Formats
Format Data Order
0 4 Byte (binary) CRLF MSB before LSB(=00H)
2 2 Byte (binary) CRLF MSB, LSB
4 4 Byte (binary) CRLF LSB(=00H) before MSB
6 2 Byte (binary) CRLF LSB, MSB
8 4 Byte (binary) CRLF MSB before LSB(=Status)
ASCII Formats
Format Parameter 1 Parameter 2 Parameter 3
1, 3 Weight (8) CRLF
5, 7 Weight (8) , Address(2) CRLF
9, 10 Weight (8) , Address(2) , Status (3) CRLF
11 Weight (8) , Address(2) , Extended Status (3) CRLF
Values in brackets signify the number of characters in the fixed length response.
The weight format is the sign (space or minus), followed by 7 digits 0 to 9 including
the decimal point if used.
The binary formats are useful for PLC communications in applications where
conversion of the ASCII weight string is not possible. The binary outputs can
generally be used directly by the PLC.
Status Details
Status Description Bit Comment
001 Overload 0 Weight reading out of range. Underload or
overload.
002 Standstill 1
004 Gross 2
008 Range 2 Active 3 Only used with multi-range or multi-interval.
016 Output 1 Active 4
032 Output 2 Active 5
064 Output 3 Active 6
128 Output 4 Active 7
256 Centre of Zero 8 This status bit is only available in the
extended status - Format 11 only.

Rinstrum 5200 Specifications

General

Brand	Rinstrum
Model	5200
Category	Measuring Instruments
Language	English