Publication 2711C-UM001C-EN-P - September 2009 101
Appendix
C
PanelView Component Emulator
Overview
The PanelView Component terminal emulator is treated as a terminal
and runs almost the exact same firmware. The emulator has its own
file system. One folder of the file system (PC Storage) can be mapped
to a folder in your computer’s file system. Anything stored in the
mapped folder can be accessed by both the emulator and your
computer.
By default on the emulator, applications are saved to the mapped
folder (PC Storage).
Install the Emulator
The PanelView Component emulator can be installed on computers
running Windows XP (SP2) or Windows Vista. For better emulator
performance, your computer should have at least an Intel Pentium M
1400 MHz processor, with 512MB RAM.
Your computer information can be found by right-clicking on
My Computer and selecting properties.
The PanelView Component Emulator Installer installs the following
five components. If you select Full Install, all five of these components
are installed. If you select Custom Install, you have the option of
selecting which of these components are installed.
• Microsoft Device Emulator
• Microsoft Virtual PC
• Microsoft Loopback adapter
• PanelView Component Emulator
• Extended support files - fonts, demos, graphics, help
To Next Page
Loading...
Need help?
General
