Rockwell Automation 2711C-F2M User Manual

120 Publication 2711C-UM001C-EN-P - September 2009
Appendix D Firmware Update Utility
4. Click Next to start the installation.
5. Click Close when the installation is complete.
Update Firmware
This section shows how to update the firmware image on a
nonoperating terminal.
Follow these steps to update the firmware image on the terminal.
1. Connect the USB host port of your computer to the USB device
port on the terminal.
2. From the Start Menu, select Programs>Allen-Bradley>PanelView
Component Firmware Update Utility.

Rockwell Automation 2711C-F2M Specifications

General

Brand	Rockwell Automation
Model	2711C-F2M
Category	Touch terminals
Language	English