74 Publication 2711C-UM001C-EN-P - September 2009
Chapter 5 Upgrade Firmware
4. Verify the existing firmware revision of the terminal by looking
in the Configuration Screens, and compare to the firmware
revision of the file to make sure you are performing the desired
upgrade.
Refer to
View System Information on page 48 for instructions on
how to view the current firmware version.
Firmware Installation Using
Removable Storage Device
The terminal can install firmware from a removable storage device;
either a USB flash drive or an SD storage card. The firmware consists
of an Autorun executable and firmware images that is downloaded
from the PanelView Component technical support website.
http://ab.com/eoi/graphicterminals/panelviewcomponent.html
The firmware installation starts when the storage device is inserted
either while the terminal is running, or when the terminal is powered
on. During the firmware installation, you can upgrade or downgrade
one or more of these firmware images:
• Windows CE Operating System
• Application
• Communication
• Asian font, Chinese or Korean
The terminal has a firmware partition that accommodates one
user-installable Asian font. A Simsun Chinese font is
factory-installed. Firmware images for the Simsun Chinese font
and Gulim Korean font are on the CD that ships with the
terminal and can be downloaded from the technical support
website.
TIP
The currently installed Asian font firmware image is
visible in the list of Configuration Languages on the
Main Screen.
To Next Page
Loading...
Need help?
General
