7Publication 2711C-UM001C-EN-P - September 2009 7
Preface
Objectives
This preface provides information on these topics.
• Intended audience
• Additional resources
• Firmware upgrades
Intended Audience
Use this manual if you are responsible for operating, or
troubleshooting the PanelView Component terminals. This manual
provides information for configuring the PanelView Component
terminal. You can configure the terminal on the terminal, through a
web browser on a computer connected to the terminal, or through the
PanelView Component emulator.
This manual does not give procedures for creating applications that
run on the terminal.
No special knowledge is required to understand this manual or
operate the terminal.
Equipment installers must be familiar with standard panel installation
techniques.
Additional Resources
For additional information on the PanelView Component terminals,
refer to these publications, that you can download from
http://literature.rockwellautomation.com
.
If you would like a manual, you can:
• download a free electronic version from the Internet at
http://literature.rockwellautomation.com
• purchase a printed manual by contacting your local
Allen-Bradley distributor or Rockwell Automation sales office.
Resource Description
PanelView Component Terminal Installation
Instructions, publication 2711C-IN001
Provides instructions for installing a
PanelView Component terminal.
PanelView Component Operator Terminals
Quick Start, publication 2711C-QS001
Provides instructions on setting up a sample
application on a PanelView Component
terminal.
To Next Page
Need help?
General
