Rockwell Automation 2711C-F2M User Manual

48 Publication 2711C-UM001C-EN-P - September 2009
Chapter 2 Configuration Mode
View System Information
You can view system information about your terminal including
information about the firmware, boot code, logic board, battery status
(if applicable), terminal on time, and memory used.
Follow these steps to view system information using the PanelView
Explorer Startup window.
1. Go to the PanelView Explorer Startup window.
2. Click the Terminal Settings link.
3. Click the System Information tab.

Rockwell Automation 2711C-F2M Specifications

General

Brand	Rockwell Automation
Model	2711C-F2M
Category	Touch terminals
Language	English