Rockwell Automation PanelView Plus 1000 User Manual

170 Publication 2711P-UM001I-EN-P - December 2008
Chapter 7 Terminal Connections
PanelView Plus and PanelView Plus CE Terminals to Logix Controllers
PanelView Plus Terminals to Communication Adapters
Cables: PanelView Plus and PanelView Plus CE to Logix Controllers
Protocol PanelView Plus Comm Port
ControlLogix
CH0 (9-pin RS-232)
(DF1)
CompactLogix
CH0 (9-pin RS-232)
(DF1 or DH-485)
FlexLogix
CH0 (9-pin RS-232)
(DF1)
DF1
(any)
RS-232 (DF1) Comm Port (9-pin)
PanelView Plus 400 to 1500
2711P-RN22C
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
DH-485
(any)
RS-232 (DH-485) Comm Port (9-pin)
PanelView Plus 400 to 1500
2711P-RN22C
N/A
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
DH-485 Communication Port
PanelView Plus 400 -1500
2711P-xxx3xx, -xxx6xx, 2711P-RN3
(1)
, 2711P-RN6
(1)
For CE compliance, use the 1761-NET-AIC or 1747-AIC module for cable lengths longer than 30 m (98 ft).
N/A Use AIC+ Module
(1761-NET-AIC)
Connect to Port 3
N/A
ControlNet
xxx15xx
ControlNet Communication Port
PanelView Plus 400 and 600
2711P-RN15C
PanelView Plus 700 to 1500
2711P-xxx15xx, 2711P-RN15S
Use 1756-CNB Module with
ControlNet Cable
1769-L35C
with ControlNet Cable
Use 1788-CNC or 1788-CNF Card
with ControlNet Cable
DeviceNet
DeviceNet Communication Port
PanelView Plus 400 and 600
2711P-RN10C
PanelView Plus 700 to 1500
2711P-RN10H
Use 1756-DNB Module
with DeviceNet Cable
Use 1769-SDN Module
with DeviceNet Cable
Use 1788-DNBO Module
with DeviceNet Cable
EtherNet/IP
(any except
xx5xx)
EtherNet/IP Comm Port
PanelView Plus 400 to 1500
(except 2711P-xxx5xx)
Use 1756-ENET or 1756-ENBT
Module with
Ethernet Cable
To 1769-L35E with Ethernet Cable
Use 1788-ENBT Module
with EtherNet Cable
Remote I/O
xxx1xx
xxx6xx
Remote I/O Communication Port
PanelView Plus 400 to 1500
2711P-xxx1xx, -xxx6xx, 2711P-RN1, 2711P-RN6
Use 1756-DHRIO Module
with
Shielded Twinaxial Cable
(1770-CD)
N/A N/A
DH+
xxx6xx
xxx8xx
DH+ Communication Port
PanelView Plus 400 to 1500
2711P-xxx6xx, -xxx8xx, 2711P-RN6, 2711P-RN8
Use 1756-DHRIO Module
with
Shielded Twinaxial Cable
(1770-CD)
N/A N/A
Cables: PanelView Plus to Communication Adapters
Protocol PanelView Plus Comm Port 1747-AIC
1761-NET-AIC
Port 1 (9-pin)
Port 2
8-pin Mini DIN()
Port 3
(DH-485)
1761-NETDNI
or 1771-NET-ENI
DF1 (any) RS-232 Comm Port (9-pin)
PanelView Plus 400 to 1500
2711P-RN22C
N/A
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
2711-NC21 (5 m/16 ft)
2711-NC22 (15 m/49 ft)
N/A
1761-CBL-AP00 (5 m)
1761-CBL-PM02 (2 m)
2711-CBL-PM05 (5 m)
2711-CBL-PM10 (10 m)
DH-485
(any)
RS-232 Comm Port (9-pin)
PanelView Plus 400 to 1500
2711P-RN22C
N/A
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
2711-NC21 (5 m/16 ft)
2711-NC22 (15 m/49 ft) N/A
DH-485 Communication Port
PanelView Plus 400 and 600
2711P-xxx3xx, 2711P-RN3
(1)
1747-C10 (2 m/6ft)
1747-C11 (0.3 m/1 ft)
1747-C20 (6 m/20 ft)
N/A
1761-CBL-AS03
(3 m/10 ft)
1761-CBL-AS09
(9 m/30 ft)
to single AIC+
N/A
DH-485 Communication Port
PanelView Plus 700 to 1500
2711P-xxx6xx, 2711P-RN6
Direct Connection to
Single AIC with
Belden 9842 Cable
(2)
N/A
Direct Connection to
Single AIC+ with
Belden 9842 Cable
(2)
N/A
(1)
For CE compliance, use the 1761-NET-AIC or 1747-AIC module for cable lengths longer than 30 m (98 ft).
(2)
Use serial port on terminal with an AIC+ module for a DH-485 network solution.

Rockwell Automation PanelView Plus 1000 Specifications

General

Brand	Rockwell Automation
Model	PanelView Plus 1000
Category	Touch terminals
Language	English