Publication 2711P-UM001I-EN-P - December 2008 207
Upgrade Firmware Chapter 8
Load PanelView Plus CE Components
You can load PanelView Plus CE Components by using an:
• ActiveSync connection.
• external CompactFlash card.
ActiveSync Connection
When the new operating system is running, load the PanelView Plus
CE components as follows.
1. Establish an ActiveSync connection between your computer and
the PanelView Plus CE terminal, using either a serial or Ethernet
connection (Ethernet is recommended).
Refer to page 193.
2. Open the PanelView Plus CE Install Utility folder on the
PanelView Plus CE Accessory CD and run the
InstallFromActiveSync.exe program.
This program lets you select which features to install and
automatically copies the files from the CD to the PanelView Plus
CE terminal. You must run the program from its directory to
make sure the program locates all the files correctly.
3. Select the desired components from the list of available
components.
Use the >> button to install everything.
Once installed, components can be optionally removed to free
space in the \Storage Card folder.
4. When satisfied with the selections, click Install/Remove.
Depending on the options selected and the speed of your
ActiveSync connection, the download process may take several
minutes.
For a serial ActiveSync connection at 19.2 Kbps, the download
time can be 30 minutes. When the download is complete, you
will see the number of files copied or deleted.
5. Restart the PanelView Plus CE terminal.
To Next Page
Loading...
Need help?
General
