Publication 2711P-UM001I-EN-P - December 2008 153
Install and Replace Components Chapter 6
Replace the Battery
The 700 to 1500 terminals have a lithium battery that is intended to be
replaced during the life of the product. The battery is used by the
real-time clock and static RAM and is not used for application backup
or retention.
The 400 and 600 terminals contain a lithium battery which is
permanently connected and should only be removed by trained
professionals.
For information on battery removal for 400 and 600 terminals, see
Disposal Information
on page 228.
At the end of its life, the battery contained in this product
should be collected separately from any unsorted municipal
waste.
SHOCK HAZARD
Failure to follow proper safety precautions could result in
severe electrical shock or damage to the computer.
ATTENTION
To avoid voiding your product warranty, use only the Rockwell
Automation Allen-Bradley approved battery. Use of another
battery may present a risk of fire or explosion.
WARNING
When you connect or disconnect the battery an electrical arc
can occur. This could cause an explosion in hazardous location
installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
For Safety information on the handling of lithium batteries,
including handling and disposal of leaking batteries, see
Guidelines for Handling Lithium Batteries, publication AG 5-4.
Replace the battery only with the indicated catalog number.
Do not dispose of battery in a fire or incinerator. Dispose of
used batteries in accordance with local regulations.
Store batteries in a cool, dry environment. We recommend
25 °C (77 °F) with 40…60% relative humidity. You may store
batteries for up to 30 days between -45…85 °C, (-49…185 °F)
such as during transportation. To avoid leakage, do not store
batteries above 60 °C (140 °F) for more than 30 days.
To Next Page
Loading...
Need help?
General
