Roland Camm-1 CX-24/12 User Manual

47
9 Display Menu Descriptions
Stored in Memory
Factry Default
Selection Choices
Description
Yes
ENGLISH
ENGLIS,
, Deut., FRANÇ, , ITAL.,PORTUG,
This selects the language for messages on the display. To display this menu,
switch on the power while holding down the [MENU/PARAM] key.
LANG. |< ENGLIS>
LANG.
Stored in Memory
Factry Default
Selection Choices
Description
Yes
Metric
Metric, Inch
This selects the unit of measurement for numerical values shown on the
display.
To display this menu, switch on the power while holding down the [MENU/
PARAM] key, then turn the dial clockwise.
UNIT | <Metric>
UNIT
Description
This menu is for performing checks when the CX-24/12 is not operating
correctly.
To display this menu, switch on the power while holding down the [ ] key.
DEMO CUT
DEMO CUT
Description
[ENTER] returns the settings to their factory defaults.
To display this menu, switch on the power while holding down the [ENTER]
key.
INITIALIZE EEROM
INITIALIZE EEROM

Roland Camm-1 CX-24/12 Specifications

General

Brand	Roland
Model	Camm-1 CX-24/12
Category	Plotter
Language	English