Roland VC-100UHD User Manual

17
Using the Memory
How the Memory Is Congured
This unit operates with the settings saved in “current memory.”
The current memory consists of “common parameter memory” and
“parameter memory.”
The settings in current memory are automatically saved when editing
with this unit, and are loaded when you turn on the power.
VC-100UHD
Common parameters
Parameters
Current memory
Internal memory
Memory 1 Memory 5
Memory 2 Memory 6
Memory 3 Memory 7
Memory 4 Memory 8
Recall Store
USB ash drive
Load
Save
vc100uhd.bin
Memory 1 Memory 5
Memory 2 Memory 6
Memory 3 Memory 7
Memory 4 Memory 8
Common parameters
Parameters
Current memory
Common parameter memory
Saves the LCD, network and panel lock settings.
Parameter memory
Saves the input/output and channel settings.
Up to eight parameter memories can be saved to internal memory.
Also, you can save all settings as a single set to a USB ash drive.
Saving to Internal Memory
This saves the parameter memory settings to internal memory.
1. Select Root menu “System” 0 “Memory” 0
Internal Memory “Store.”
2. Turn the [VALUE] knob to select the save-destination
memory (NO. 1–8).
3. Turn the [PAGE/CURSOR] knob to select “Execute,” and
then press the [PAGE/CURSOR] knob.
The current settings are saved.
When the operation is nished, the message “Done.” appears.
Recalling the Saved Settings
This recalls the settings saved in internal memory. When these
settings are recalled, the contents of the parameter memories that are
in current memory are overwritten.
1. Select Root menu “System” 0 “Memory” 0
Internal Memory “Recall.”
2. Turn the [VALUE] knob to select the memory (NO. 1–8)
that you want to recall.
3. Turn the [PAGE/CURSOR] knob to select “Execute,” and
then press the [PAGE/CURSOR] knob.
The settings are recalled.
When the operation is nished, the message “Done.” appears.

Roland VC-100UHD Specifications

General

Brand	Roland
Model	VC-100UHD
Category	Media Converter
Language	English