Roland VC-100UHD User Manual

24
Setup Menu List
Processing
Input
Menu item (Parameter) Value (Bold: default) Explanation
Channel
CH. 1–8
Selects the channels to input to the processing system.
If the input source is the same before and after switching, the video cuts to the
next one. If the input source diers, the video switches by fading to black.
Source
– Shows the source selected for the channel.
State
– Shows the status of the signal from the source selected for the channel.
Main Processing
Menu item (Parameter) Value (Bold: default) Explanation
Format
Refer to “Output video formats”
(p. 9)
Sets the output format.
* The selectable formats dier depending on the system’s “Frame Rate” value
(p. 31).
Fade to Black
This sets whether the fade eect applied to the output video uses the FTB function or not.
THRU The FTB function is not used.
FTB
The FTB function is used to fade the output video to black.
* The fade time is set in the “Fade Time” system parameter (p. 31).
Color Gamut
REC.601, REC.709, REC.2020, Auto Species the color gamut.
Dynamic Range
SDR, HDR PQ, HDR HLG, Auto Species the dynamic range.
Flip H
Disabled, Enabled Set this to “Enabled” to ip (invert) the video horizontally.
Flip V
Disabled, Enabled Set this to “Enabled” to ip (invert) the video vertically.
Rotation
Disabled, Enabled Set this to “Enabled” to rotate the video clockwise 90°.
ROI (Region of Interest)
Disabled, Enabled Enables/disables the ROI function.
Size H
0–16384 Sets the ROI’s horizontal size in pixels.
Size V
0–4320 Sets the ROI’s vertical size in pixels.
Position H
-16384–0–+16384 Sets the ROI’s horizontal position in pixels.
Position V
-4320–0–+4320 Sets the ROI’s vertical position in pixels.
Masking Color
Black, White, Red, Green, Blue,
Yellow, Cyan, Magenta
Sets the color of the area outside of the ROI.
Sub Processing
Menu item (Parameter) Value (Bold: default) Explanation
Sub Processing
Disabled, Enabled
Enables/disables the sub processing.
* Set this to “Disabled” when EDID (p. 29) is set to “Sink Through” in “Input”
0 “HDMI,” or when “Rotation” (p. 24) in Main Processing is set to “Disabled.”
Format
Refer to “Output video formats”
(p. 9)
Sets the output format.
* The selectable formats dier depending on the system’s “Frame Rate” value
(p. 31).
Fade to Black
This sets whether the fade eect applied to the output video uses the FTB function or not.
THRU The FTB function is not used.
FTB
The FTB function is used to fade the output video to black.
* The fade time is set in the “Fade Time” system parameter (p. 31).
Color Gamut
REC.601, REC.709, REC.2020, Auto Species the color gamut.
Dynamic Range
SDR, HDR PQ, HDR HLG, Auto Species the dynamic range.
Flip H
Disabled, Enabled Set this to “Enabled” to ip (invert) the video horizontally.
Flip V
Disabled, Enabled Set this to “Enabled” to ip (invert) the video vertically.
Rotation
Disabled, Enabled Set this to “Enabled” to rotate the video clockwise 90°.
ROI (Region of Interest)
Disabled, Enabled Enables/disables the ROI function.
Size H
0–16384 Sets the ROI’s horizontal size in pixels.
Size V
0–4320 Sets the ROI’s vertical size in pixels.
Position H
-16384–0–+16384 Sets the ROI’s horizontal position in pixels.
Position V
-4320–0–+4320 Sets the ROI’s vertical position in pixels.
Masking Color
Black, White, Red, Green, Blue,
Yellow, Cyan, Magenta
Sets the color of the area outside of the ROI.

Roland VC-100UHD Specifications

General

Brand	Roland
Model	VC-100UHD
Category	Media Converter
Language	English